A tanning mitt helps you get a smooth and flawless tan. If you’re tired of streaks and uneven splotches from fake tans, then use this to get an even bronze glow. And if you’re confused about how to use a mitt, don’t worry! This guide will show you the proper way of using a tanning mitt. Make sure to follow these easy steps to get the best result you desire.
Tanning Mitt: The Secret Weapon to Getting a Great Tan
In this article:
- Step 1: Prepare Your Body
- Step 2: Prepare Your Materials
- Step 3: Apply Your Self-Tanner to the Tanning Mitt
- Step 4: Gently Spread the Self-Tanner on Your Skin
- Step 5: Brush Off the Excess and Blend
- Step 6: Maintain Your Tan
- Step 7: Clean Your Tanning Mitt
Step 1: Prepare Your Body
Even the world’s best tanning mitt won’t help you if your body isn’t prepared. Before applying your self-tanner, remember to shower and exfoliate. If your skin is dry and dirty, it won’t absorb the self-tanner well, leading to streaks. Also, moisturize the drier body parts, like your elbows and knees.
Step 2: Prepare Your Materials
After cleaning yourself, prepare your main products: a tanning mitt and self-tanner. Usually, people use tanning lotions as tanners, but there are also mousses and sprays. You can also have other things ready to help you self-tan. Putting tape on the parts of your body not usually exposed to the sun, like the soles of your feet, keeps them from absorbing the tanning lotion. Also, latex gloves keep you from getting orange palms, especially the hand applying the tanner.
Step 3: Apply Your Self-Tanner to the Tanning Mitt
Not all tanning mitts look the same, but most tanning mitts have a soft, velvety, or spongy side. You apply the tanner on that side. You don’t need to apply so much self-tanner since the tanning mitt allows you to distribute it evenly on your body. You mustn’t be stingy with your tanning product. If you’re stingy with your self-tanner or tanning lotion, streaks might appear on the areas which didn’t receive much tanner.
Step 4: Gently Spread the Self-Tanner on Your Skin
First, don’t rub, since rubbing only leads to streaks. Instead, use the tanning mitt to spread the tanner to your skin in a gentle, circular motion. You can start with your face and neck and work your way down your body. For the hard-to-reach areas like your back, you can get a friend to help. Give them your mitt and ask them to apply the product. Or, use a body brush or even a spatula or wooden spoon. Put the mitt on one end, and tie it with a rubber band or string to the handle. Voila! You get a DIY mitt, which can reach any body part.
Step 5: Brush Off the Excess and Blend
Use the other, clean side of your mitt to brush off any excess product. For areas like your knuckles or the spaces between your fingers and toes, blend the product so the color comes out evenly, without streaks.
Step 6: Maintain Your Tan
After you’re done applying your tanning product, remove your mitt. Blow dry your body to let the self-tanner dry more quickly, then scrub your palms with an exfoliant to remove any excess product. Also, apply baby powder to your body to keep sweat from ruining your tan. Avoid showering or getting wet a day after your sunless tanning. Follow these steps to maintain and care for your tan.
Step 7: Clean Your Tanning Mitt
Rinse your mitt and leave it to dry. You shall replace this every few months, so you won’t end up with an overused tanning mitt.
Still confused about using a tanning mitt? Then watch the video from Sam Ozkural below:
A tanning mitt keeps the streaks and zebra-stripes from your skin. A mitt gives you the smooth, even glow, as if you’ve had a great day at the beach. It’s easy-to-use, it’s cheap, and it’ll give you the tan you’ve always wanted! Don’t forget to follow these steps so you’ll have a perfect tan without staying long under the sun.
Do you have any questions or experiences using a tanning mitt? Share your experience in the comments section below.